Staple Operation - Canon J1 Service Manual

2
Technology > Processing Tray Unit > Basic Operation > Staple Operation
An example:4 sheets , 4 sets , A4 size ,(printing total :16 sheets)
1)From the 1 sheet to the 4 sheets, move it towards a board.
2)From the 5 sheets to the 8 sheets, move it towards a board.
3)From the 9 sheets to the 12 sheets, move it towards a board.
4)From the 13 sheets to the 16 sheets, move it towards a board.
Results Delivering 4 sets
3rd set
1rd set
Direction of delivery
2
Technology > Processing Tray Unit > Basic Operation > Staple Operation
Rear aligning plate
Sheet to be offset
Front aligning plate
Tray
F-2-26
Rear aligning plate
Sheet to be offset
Front aligning plate
Tray
F-2-27
4rd set
2rd set
F-2-28

■ Staple Operation

This product is equipped with two Staplers.
While the Stapler unit of the Finisher unit provides 1-point front stapling, 1-point rear stapling,
and 2-point stapling, the Stitcher unit of the Saddle Stitcher unit provides 2-point center
stapling.
Stack ejection roller
Swing guide
Processing tray
Front diagonal stapling
Rear diagonal stapling
2-16
Return roller
Stapler
F-2-29
Paper width 1/2
2-point stapling
F-2-30
2-16