Connecting The Printer To The Network; Connecting To Usb Devices - Honeywell PC42d User Instructions

Desktop printer
Hide thumbs Also See for PC42d:
Table of Contents

Advertisement

Chapter 2: Connecting the Printer

Connecting the printer to the network

If your printer is equipped with factory-installed optional Ethernet port, you can connect
it to the network. The printer's default setting is for obtaining IP address through DHCP.
If your network uses other means to distribute IP address, you would have to use the
printer configuration software to configure the IP address distribution method using
USB or optional serial port connection.
1. Switch on the printer;
2. Connect one end of the Ethernet cable to the printer and the other end to the
3. Print a configuration label to find the printer's IP address. Please refer to
4. Use the printer portal or simple diagnostic tools to configure the necessary

Connecting to USB devices

You can use the USB port on the printer to connect to the keyboard, bar code scanner
or USB thumb drive.
1. When connecting to the USB thumb drive please ensure that it is equipped with a
2. Connect the device to the USB port.
User Instructions for PC42d Desktop Printer
network;
"Testing Labels".
When the printer's LED turns steady green, wait for about 10 seconds to obtain the
printer's IP address. If the test label shows the printer's IP address as 0.0.0.0, wait
for another 10 seconds before printing another test label.
Ethernet setting.
single drive and formatted (FAT16 or FAT32);
Page 14
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents