Setting Command Language Using Printer Button; Setting Command Language Using Printer Portal - Honeywell PC42d User Instructions

Chapter 1: About the Printer

Setting command language using printer button

1. Please ensure that the printer has been installed with the medium;
2. Switch off the printer's power supply;
3. Press the printer button;
4. Switch on power supply; the green LED indicator light should be lit and flickering.
5. After you have printed a label using a command language of your choice, release

Setting command language using printer portal

To set the printer's command language through the printer portal, the printer would
have to be connected to Ethernet.
1. Please ensure that the printer has been installed with the medium;
2. Launch a browser on your PC;
3. Key in the printer's IP address at the address toolbar and press 'Enter'. The
User Instructions for PC42d Desktop Printer
The printer will align the medium and print a configuration label. Use different
command languages at two-second intervals to print a label;
the printer button.
printer's portal will be displayed.
13