This section explains the Ethernet IPv4 settings. To view such settings:
Designates the method with which the printer obtains its IP address.
Designates the sole layer network address assigned to each device in
the TCP/IP network (IPv4).
Designates the numerals used to define the IP address in a TCP/IP
Designates the router's IP address. The device will send data packet
to another subnet or unknown destination through this router.
Designates whether the printer receives DHCP response through
broadcast or unicast.
This section explains the medium settings of the printer. To view such settings:
Note: If the printer is not connected to a network, you would be required to use SDTs
and configure the medium settings via USB connection.
On the printer web page click 'Configure' options > 'Communications' >
On the printer web page click 'Configure' options > 'Printing' > 'Media'.
Appendix B - Default Settings
User Instructions for PC42d Desktop Printer