Table of Contents
Advertisement
Features
Oven controls
The oven controls are used to operate
the various cooking functions for
baking, roasting, grilling and heating.
They are also used to operate
– the time of day display,
– a minute minder,
– a timer to automatically switch
cooking programmes on and off,
– settings that can be customised.
Oven safety features
System lock for the oven
The system lock prevents the oven from
being used unintentionally (see "System
lock ").
The system lock will remain activated
even after an interruption to the power
supply.
30
Cooling fan
The cooling fan comes on automatically
when a cooking programme is started.
The cooling fan mixes hot air from the
oven cavity with cool room air before
venting it out into the kitchen through
vents located between the appliance
door and the control panel.
The cooling fan will continue to run for a
while after a cooking process to prevent
moisture building up in the oven, on the
control panel or on the oven housing
unit. It will switch itself off automatically
after a while.
Safety switch-off
A function without microwave can be
started without selecting a cooking
duration. To prevent overuse and the
consequent danger of fire, the oven will
switch itself off automatically after a
certain length of time. This can be
between 1 hour and 12 hours
depending on the function and
temperature chosen.
If a Microwave combination
programme is followed in quick
succession by another programme
using microwave power, the magnetron
(which produces the microwaves)
cannot be switched on again until
approx. 10 seconds have elapsed.
Therefore, wait a short while before
starting the second process.
Advertisement
Table of Contents
