Advertisement
3. Software application
1. Cross-connection network cable
Note：W: white, G: green, O: orange, Bl: blue, Br: brown
2. Software settings
① . Compress the software in CD to computer.
② . Connect the LAN port with PC.
③ . Set the PC IP to 192.168.1.XXX network segment (XXX is a
user-definable parameter).
④ . Open the application program,
then select the monitor which is
needed to be adjusted (Monitor1
or Monitor2).
⑤ . Set
the
according to user's individual
requirements.
First, click the "read" button to
read the corresponding parameter
value of the device to the software,
secondly, modify the parameter
value on the software, then, the
instruction can be realized on the
device.
parameter
values
7
Advertisement
