Table of Contents
Advertisement
Display
Configure various display settings on the DVR.
To configure Display settings:
1. Adjust the following options:
• HDD FREE SPACE:
display the remaining capacity of the
internal hard drive.
• HDD FREE SPACE MODE:
display format for the remaining hard
drive space as PERCENT or GIGABYTE.
• RECORD STATUS:
display the recording status for each
channel.
• CLOCK DISPLAY:
default, ON) to display the date and time
on screen.
• DATE & TIME MODE: Select the format for
the date and time display.
• YY/MM/DD: Date and time is displayed
with digits (e.g. 2005/10/02 00:00:00).
• MM/DD/YY: Months are displayed with
characters (e.g. OCT/02/2005 00:00:00).
• DD/MM/YY: Days are displayed with
characters (e.g. 02/OCT/2005 00:00:00).
• TITLE DISPLAY:
the channel title.
Select TEXT/BITMAP (by
• TITLE MODE:
default, TEXT). See Title.
• BORDER COLOR:
as the border color for each channel while
in a split-screen display view.
• REMOTE CONTROL ID:
display or hide the remote control ID in
use with the system. By default, this
option is set to OFF.
• SPOT TITLE DISPLAY: Set to ON/OFF to
display a title on the spot monitor.
Note: Spot monitor must be connected in
order to select this option.
2. To save your settings to the DVR, click
Update to DVR.
Select ON/OFF to
Select the
Select ON/OFF to
Select ON/OFF (by
Select ON/OFF to display
Select WHITE/BLACK
Select ON/OFF to
Title
Edit the titles (names) and/or bitmap text for
selected channels.
Figure 24.1 Bitmap title options
To edit titles, click the text field for the selected
channel and type the new title.
To edit bitmap text:
NOTE: Make sure you have enabled Bitmap
text in Screen>Display>TITLE MODE
before editing bitmaps in the Title menu.
1. From the TITLE tab, click the text field for
the selected channel. The channel number
will change in the bitmap grid at the bottom
of the TITLE tab.
2. Click the text field above the bitmap grid
and enter a new title for the channel.
NOTE: The text should not exceed the width
of the bitmap grid. If the text is longer than
what can fit on the grid, the text will not
display properly on the system.
3. Click Font to edit the font and font size.
Remote Setup
85
Advertisement
Table of Contents
