Launching Digiclient; Adding A Dvr - Digimerge VB300 SERIES Instruction Manual

LAUNCHING DIGICLIENT

With DigiClient installed, open DigiClient from the desktop icon or the Start menu.
NOTE: Make sure you have connected the DVR to your network and have DHCP turned ON.
To launch DigiClient:
1. Double-click the DigiClient icon on the desktop or
select Start>Programs>DigiClient 5.0>DigiClient.
2. At the login window, enter your username and password—by default, username: ADMIN;
password: [leave BLANK]—and click OK.
Figure 17.0 DigiClient login
3. To exit, close the DigiClient main window, enter your username and password and click OK.

Adding a DVR

To add a DVR:
1. From the DigiClient main window, click
2. Click Search in the DVR Search window.
3. Select the DVR and click Add to List. Click OK in the next window to confirm.
Figure 17.1 DVR Search window
4. When finished, close the DVR Search window.
*Live images simulated.
56
.