Block Search; File Search - Digimerge VB300 SERIES Instruction Manual

BLOCK SEARCH

Use Block Search to search for recorded video
according to blocks on the hard disk.
NOTE: Block Search is recommended in
case of a failure when using other search
modes.
Figure 6.5 Block Search screen
To use Block Search:
1. Under HDD ID, select NORMAL, HDD 1,
or HDD 0.
NOTE: Normal is the default selection for
the single hard drive included with the
system.
2. Under SEARCH TIME, press the
buttons to select the year, month, day,
hour, minute, and second, and then press
the buttons to change the values.
3. Press the button to view the blocks for
the selected date and time.
4. Press the
and then press the
the video.
5. Press the button to exit playback
mode and return to live mode (If using a
mouse: right-click or move the scroll wheel
to exit playback).
buttons to select a block
button to playback

FILE SEARCH

Use File Search to search for video files saved
to an external USB drive or USB flash drive
(not included).
Figure 6.6 File Search screen
To use File Search:
1. If you already have an external USB drive
connected to the system, proceed to step
2. If not, connect a USB flash drive (that
contains saved video data) to the front
panel of the system.
2. From the SEARCH menu, select FILE
SEARCH and press the
3. Under MEDIA, press the
select USB_FRONT, USB_REAR1, or
USB_REAR2 and press the
list of files appears on the screen.
.dvr
4. Press the
and press the
playback.
5. Press the button to exit playback
mode and return to live mode (If using a
mouse: right-click or move the scroll wheel
to exit playback).
Using the System
button.
buttons to
button. A
buttons to select a file
button to begin
19