Table of Contents
Advertisement
Remote Setup
(i.e. 30 fps), while a long recording period will
result in a lower FPS rate (i.e. 16 fps)
• AUDIO RECORD: Set to ON/OFF
Note: An audio capable camera (not
included) or microphone (not included) are
necessary is necessary for audio recording.
• REMOTE CONTROL ID: Designate an ID for
the remote control to use with the system. Set
from 11, 12, 13, 14, 21, 22, 23, 24, 31, 32,
34, 41, 42, 43, 44, and ALL
To save your settings to the DVR, click Update
to DVR.
Screen
The Screen tab contains the following options:
Figure 24.0 Screen: Auto Sequence
• AUTO SEQUENCE
• DISPLAY
• TITLE
• MULTI SCREEN
• COVERT
• SPOT
• CAMERA
84
Auto Sequence
Configure full-screen and multi-screen display
settings for Auto Sequence mode.
To configure Auto Sequence:
1. Under AUTO-SINGLE, click
increase/decrease for individual channels.
The higher the dwell time, the longer the
channel will remain displayed on screen.
2. Check VIDEO LOSS SKIP to remove
disconnected channels from Auto
Sequence.
3. Check ADD AUTO SINGLE to enable/
disable single channels from Auto
Sequence. If disabled, all single
(full-screen) channels will be skipped while
in Auto Sequence.
4. Under AUTO-SPLIT, click
increase/decrease the dwell time for the
various multi-screen displays.
5. To save your settings to the DVR, click
Update to DVR.
to
to
Advertisement
Table of Contents
