Table of Contents
Advertisement
Connecting to Your DVR
With ActiveX installed, you can now view streaming video from your DVR.
To connect to your DVR:
1. In the IP address / Port text field,
enter your system's IP address or
DDNS address; click
your system's port number (by
default, 5400).
NOTE: The port number you enter
on the site must match the port
number on your DVR.
2. Click Connect.
3. When prompted, enter your 8-digit
system password (ADMIN: by
default, 11111111) and click OK.
Live video appears from your
connected DVR.
NOTE: Split-screen layout depends
on the number of channels available
on your DVR.
*Images simulated.
Figure 38.2 Click the warning bar to install ActiveX.
to enter
Figure 38.4 Enter the IP address and port of your DVR
Figure 38.6 Live display view in Internet Explorer*
Appendix M: Remote Viewing using Internet Explorer
Figure 38.3 Install the Active X plug-in
Figure 38.5 Click Connect, then enter your
system password
127
Advertisement
Table of Contents
