Connecting up
5.2 Connecting the device
5.2
Connecting the device
5.2.1
PROFIBUS assembly guidelines
Further information on PROFIBUS and PROFINET can be found on the Internet "PI
PROFIBUS - PROFINET (http://www.profibus.com/home/)" > DOWNLOADS under
"Installation guidelines".
Opening the device
1. Use a 3 mm Allen key to loosen the cover (if present).
2. Unscrew the cover of the electrical cable compartment. An identification text "FIELD
TERMINALS" is provided at the side of the housing.
Procedure
1. Insert the connecting cable through the cable gland
2. Connect the device to the plant with the protective conductor connection
66
②
.
SITRANS P DS III/P410 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00053276-08
⑥
.