Siemens SITRANS P DS III Operating Instructions Manual page 149

6. Select the "Generate module drivers" check box.
7. Click the "OK" button.
The parameters are connected.
Note
Until PROFIsafe commissioning is completed, the device displays the error "B_60: Bad
function check". This has no effect on the operation of the device. The error message lets
you know that the device is not yet in "S4".
SITRANS P DS III/P410 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00053276-08
Functional safety
8.7 PROFIsafe
149