Siemens SITRANS P DS III Operating Instructions Manual page 87

Table 6- 14
Unit
kg
g
t
oz
Table 6- 15
Unit
K
°C
Table 6- 16
Unit
arbitrary
%
Note
The profile allows a much larger number of possible units. There is no limitation on some
physical values special to the output of the analog input function block. For instance, if you
have selected a unit with SIMATIC PDM which does not appear in the corresponding valid
list, the current measurement value will be shown without a unit in the measured value
display.
See also
Units of the pressure transducer block (Page 102)
SITRANS P DS III/P410 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00053276-08
Unit for mass (M)
Display
KG
G
T
oz
Unit for temperature (T)
Display
K
°C
Unit for user-specific (U)
Display
Max. 16 characters,
If more than 5 characters, the display shows the unit as a ticker.
The input of the characters to be displayed can only be performed through the
PROFIBUS.
%
Unit Display
lb lb
STon STon
LTon LTon
Unit Display
°F °F
°R °R
Operation
6.5 Local operation
87