Improper Device Modifications; Requirements For Special Applications - Siemens SITRANS P DS III Operating Instructions Manual

Safety information

2.2 Improper device modifications

The standards applied can be found in the EC declaration of conformity for the device.
2.2 Improper device modifications
Improper device modifications
Danger to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
• Only carry out modifications that are described in the instructions for the device. Failure
2.3

Requirements for special applications

Due to the large number of possible applications, each detail of the described device
versions for each possible scenario during commissioning, operation, maintenance or
operation in systems cannot be considered in the instructions. If you need additional
information not covered by these instructions, contact your local Siemens office or company
representative.
Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application
department before you operate the device under special ambient conditions as can be
encountered in nuclear power plants or when the device is used for research and
development purposes.
16
WARNING
to observe this requirement cancels the manufacturer's warranty and the product
approvals.
SITRANS P DS III/P410 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00053276-08