Alarm Removal - Ei Electronics Ei2110e Series Instruction Manual

If the Alarm beeps and the yellow light flashes at the same
time the battery is depleted – ensure green mains power
light is on.
If a nuisance alarm occurs, press the Test/Hush button to
silence the Alarm for 10 minutes.
Clean your Alarm regularly. This will reduce the risk of
false alarms.
Remove or completely cover your Alarm when decorating
to prevent dust or other contamination damaging the Alarm.
If your Alarm sounds for no reason and will not reset, it can
be removed by releasing the clip on the base.
(see "ALARM REMOVAL" in the INSTALLER section).
5