Important Safeguards; Planning Your Escape Route - Ei Electronics Ei2110e Series Instruction Manual

When a fire Alarm system is installed, basic safety precautions should always be followed,
including those listed below:
• Please read all instructions.
• Rehearse emergency escape plans so everyone at home knows what to do in case the Alarm
sounds. Further information can be obtained from your local fire prevention officer.
• To maintain sensitivity to smoke/heat, do not paint or cover the Alarm in any manner and;
do not allow cobwebs, dust or grease to accumulate.
• If the Alarm has been damaged in any way or does not function properly, do not attempt a
repair. Return the Alarm - see "GETTING YOUR ALARM SERVICED" section.
• This appliance is only intended for premises having a residential type environment.
• Fire/Smoke/Heat Alarms are not a substitute for insurance. The supplier or manufacturer is
not your insurer.
• Do not dispose of your Alarm in a fire.
Use the Test/Hush Button on the Alarm to familiarise your family with the alarm sound and
practice fire drills regularly with all family members. Draw up a floor plan that will show each
member at least 2 escape routes from each room in the property.
Children tend to hide when they don't know what to do. Teach children how to escape, open
windows, and use roll up fire ladders and stools without adult help. Make sure they know
what to do if the Alarm goes off.

8. IMPORTANT SAFEGUARDS

9. PLANNING YOUR ESCAPE ROUTE

13