Radiolink Accessories; Getting Your Alarm Serviced - Ei Electronics Ei603MRF Instructions Manual

8. RadioLINK Accessories

Ei605MRF RadioLINK Interconnect module for the 9V Replaceable Battery
models. It plugs into the rear of the Alarm. This ensures that when one Alarm
senses fire, all units sound to give an alarm through-out the house - (see Table 1).
Ei605MTYRF RadioLINK Interconnect module for the 10 Year Lithium Battery
models. It plugs into the rear of the Alarm. This ensures that when one Alarm
senses fire, all units sound to give an alarm through-out the house - (see Table 1).
+
Ei600MRF RadioLINK Interconnect module for the Ei603TYC only. It plugs into
the rear of the Alarm. This ensures that when one Alarm senses fire, all units sound
to give an alarm through-out the house - (see Table 1).

9. Getting Your Alarm Serviced

If your Alarm fails to work after you have read the sections on "Installation", "Testing
and Maintenance" and "Troubleshooting", then contact Customer Assistance at the
nearest address given at the end of this leaflet. If it needs to be returned for repair or
replacement put it in a padded box with the battery disconnected (9V Replaceable
Battery models only). The 10 Year Lithium Battery models must be removed
from the mounting plate. Send it to "Customer Assistance" at the nearest address
given on the Alarm or in this leaflet. State the nature of the fault, where the Alarm
was purchased and the date of purchase.
www.acornfiresecurity.com
30
www.acornfiresecurity.com