IBM x3550 Problem Determination And Service Manual page 71

Drive-retention clip
Alignment pins
5. Slide the drive-retention clip to remove it from the drive.
6. If you are instructed to return the CD-RW/DVD drive, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Installing the CD-RW/DVD drive
To install the replacement CD-RW/DVD drive, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
on page 39.
2. Follow the instructions that come with the new drive to set any jumpers or
switches.
Drive-retention clip
Alignment pins
3. Slide the drive-retention clip to attach it to the side of the drive.
4. Slide the drive into the CD/DVD drive bay until the drive clicks into place.
5. Close the fan door.
6. Slide the server into the rack.
7. Reconnect the power cords and any cables that were removed.
8. Turn on the peripheral devices and the server.
Chapter 4. Removing and replacing server components
53