Installing The Power-Supply Backplane - IBM x3550 Problem Determination And Service Manual

Installing the power-supply backplane

To install the power-supply backplane, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Align the keyhole slots in the power-supply backplane with the mounting pins in
3. Slide the power-supply backplane toward the right side of the server until the
4. Reconnect the cables to the power supply backplane.
5. Install the power supplies into the power-supply bays (see "Installing a power
6. Install the cover (see "Installing the cover" on page 42).
7. Slide the server into the rack.
8. Reconnect the power cords and any cables that were removed.
9. Turn on the peripheral devices and the server.
on page 39.
the server.
edge-connectors are fully connected.
supply" on page 65).
Chapter 4. Removing and replacing server components
85