Accessing The Emta's Web Management - SMC Networks D3CM1604V Administrator's Manual

Accessing the EMTA's Web Management

After configuring your computer for TCP/IP and reviewing the guidelines on the previous
page, configure the EMTA using its Web-based management interface. From your Web
browser, log in to the interface to define system parameters, change password settings, view
status windows to monitor network conditions, and control the EMTA and its ports.
To display the D3CM1604V EMTA Cable Modem 's Web-based management screens, use
the following procedure.
1. Launch a Web browser.
Note: Your computer does not have to be online to configure the EMTA.
2. In the browser address bar, type
3. When the Login screen appears, enter the default username and default password
furnished by SMC Networks. The default login is:
– Username: MSO
– Password: Admin
Both are case sensitive. For security, each password character is masked as a dot (●).
Note: Your cable modem operator may customize the login password, so please check with
your operator for the correct password to use.
4. Click the LOGIN button to access the EMTA's Web interface. The Connection page
appears, showing information about the status of the cable modem's HFC and IP network
connectivity. You can also display this page any time by clicking Status > Connection in
the menu bar.
Tip: For security purposes, we recommend you change the login password after logging in to
the Web management interface for the first time (see "Configuring Security Settings" on page
40).
Configuring the EMTA
http://192.168.100.1
D3CM1604V EMTA Cable Modem Administrator Manual
and press the Enter key.
34