Table of Contents
Advertisement
The user can view the configuration and status of the SMc8002CM cable modem through a web
browser. If you want to access the web user interface, you have to connect the PC with the cable
modem using either Ethernet or USB cable before it is powered on. The procedure is described below.
Access Web User Interface
1. The PC connected to the cable modem must support TCP/IP connection and dynamic
DHCP IP address acquisition, and must have a web browser installed. Before using
the web browser, please reacquire the IP address.
2. Open the web browser and set the URL location as:
3. The web user interface can be used only by an authorized person and is protected by a
password. When one wants to retrieve the web pages, she/he has to input the correct
user name and password as shown in the window below. Input 'root' for both user
name and password, then click OK.
SMC8002CM Installation Guide
26
WEB USER INTERFACE
http://192.168.100.1
Advertisement
Table of Contents
