Powering On The Emta - SMC Networks D3CM1604V Administrator's Manual

Powering on the EMTA

After making your connections, use the following procedure to power on the EMTA:
1. Connect the supplied power cord to the power port on the rear panel of the EMTA (see
Figure 1-2 on page 13).
2. Connect the other end of the power adapter to a working power outlet. The EMTA powers
on automatically, the POWER LED on the front panel goes ON, and the other front panel
LEDs show the EMTA's status (see Table 1 on page 12).
WARNING: Only use the power supply supplied with the EMTA. Using a different power
supply can damage the EMTA and void the warranty.
Installing the EMTA
D3CM1604V EMTA Cable Modem Administrator Manual
20