SMC Networks D3CM1604V Administrator's Manual page 14

Table 2. D3CM1604V EMTA Cable Modem Rear Panel Components
Label
 and  TEL1 and TEL2
LAN

RST

CABLE

POWER

D3CM1604V EMTA Cable Modem Administrator Manual
Getting to Know the EMTA
Connect an analog telephone to one port and an analog (PSTN) telephone line to the other
port.
One 10/100/1000 auto-sensing RJ-45 switch port. Connect a device on your LAN such as a
computer, hub, or switch to these ports.
Use this button to reset the power or restore the default factory settings (see "Using the Reset
Button" on page 15).
Connect your coaxial cable line to this port.
Connect the supplied power cord.
14
Description