Connecting To The Lan - SMC Networks D3CM1604V Administrator's Manual

Connecting to the LAN

Using an Ethernet LAN cable, you can connect the EMTA to a desktop computer, notebook,
hub, or switch. The EMTA supports auto-MDI/MDIX, so you can use either a standard
straight-through or crossover Ethernet cable.
1. Connect either end of an Ethernet cable to the LAN port on the rear panel of the EMTA
(see Figure 2-1).
Figure 2-1. Connecting to an Ethernet Port on the EMTA Rear Panel
2. Connect the other end of the cable to your computer's network-interface card (NIC) or to
another network device (see Figure 2-2).
Figure 2-2. Connecting the EMTA to the a Laptop or Desktop Computer
Installing the EMTA
D3CM1604V EMTA Cable Modem Administrator Manual
18