Viewing Network Connectivity - SMC Networks D3CM1604V Administrator's Manual

Viewing Network Connectivity

Path: Status > Connection
The Connection page shows information about the status of the cable modem's HFC and IP
network connectivity. The information is organized into the following sections:
Startup Procedure
Ÿ
Shows the procedures performed by the EMTA at startup, their status, and
any comment associated with the procedures.
Downstream Bonded Channels
Ÿ
Shows the channel, lock status, modulation, channel ID, frequency, power,
signal-to-noise ratio (SNR), and total correctables and uncorrectables.
Upstream Bonded Channels
Ÿ
Shows the channel, lock status, US channel type, channel ID, symbol rate,
frequency, and power.
CM IP Address
Ÿ
Shows the cable modem IP address duration and expiration date/time.
Frequency Select (DS1)
Ÿ
Lets you set the frequency to be used for communications over Digital Signal
1 (DS1). Click TUNE to apply your setting.
Current system date and time.
Ÿ
Configuring the EMTA
D3CM1604V EMTA Cable Modem Administrator Manual
38