Table of Contents
Advertisement
3.7 DMX MODE
The JETBEAM-2 has more DMX channel configurations which can be accessed from the control panel.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select DMX Mode and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select the mode and press ENTER to confirm
your choice.
• Press the MENU button repeatedly to exit the menu and save changes.
The unit is equipped with 3/5-pole XLR connections.
3.8 DMX ADDRESSING
For operation via light control unit with DMX512 protocol, is sufficient connect the controller to JET-
BEAM-2. To able to operate the JETBEAM-2 with a light controller, adjust the DMX start address for the first
a DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the JETBEAM-2. The other functions of the light effect panel are
then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
Start address
DMX channels
(example)
19
33
21
33
28
33
DMX Address: 33
DMX512 Controller
JETBEAM-2
DMX Address
Next possible start
occupied
address for unit No. 1
33-52
33-54
33-61
DMX Address: 54
Next possible start
address for unit No. 2
53
55
62
DMX Address: 75
Fig.6 - Example 21 DMX channels configuration
Next possible start
address for unit No. 3
72
76
90
DMX Address: 96
11
91
97
118
. . . . . . . . . . . .
Advertisement
Chapters
Table of Contents
