Ricoh Aficio CL7000 Operating Instructions Manual page 69

❒ The number of pages that can be
loaded in the bypass tray differs
depending on paper type. Check
that the top of the stack is not high-
er than the limit mark inside the
tray.
❒ When loading paper in the bypass
tray, use L orientation if possible.
❒ When loading the bypass tray with
paper that will be delivered into
the top-left tray, load the paper so
the side you want to print on faces
up.
Limitation
❒ You cannot use the following func-
tions when printing on paper load-
ed in the bypass tray:
• Duplex Print
• Job Separation
• Staple/Punch
• Auto Tray Select
A A A A
Open the bypass tray.
Note
❒ If you load A4 or larger size pa-
per, pull out the bypass tray ex-
tension, and then flip it open.
B B B B
Slide the side guides outward
(A A A A ), and then load paper print
side up, until it stops (B B B B ).
C C C C
Adjust the side guides to fit the
paper width.
ZDJH202J
Loading Paper
3
ZDJH203J
ZDJH204J
ZDJH205J
63