Ricoh Aficio CL7000 Operating Instructions Manual page 70

Paper and Other Media
Important
❒ Check that the top of the stack is
not higher than the limit mark
inside the tray.
❒ Shuffle the paper before loading
the stack onto the tray, so multi-
ple sheets are not fed in togeth-
er.
D D D D
Set the paper size using the con-
trol panel as follows:
3
A Press the { { { { Menu} } } } key.
"Menu" appears on the display
B Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Paper Input" menu, and
then press the { { { { # Enter} } } } key.
The following message appears
on the display:
Menu:
Paper Input
C Check "Bypass Size" appears,
and then press the { { { { # Enter} } } }
key.
The following message appears
on the display.
Paper Input:
Bypass Size
64
D Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play the size and orientation of
the paper in the bypass tray.
Bypass Size
*11 x 17
After about two seconds, the
display returns to the menu.
E Press the { { { { On Line} } } } key.
"Ready" appears on the dis-
play.
Ready
Specifying custom size paper for the
Bypass Tray
Important
❒ The paper size selected using the
ACE082S
printer driver overrides that select-
ed using the control panel. You do
not have to make settings using the
control panel if you already made
them using the printer driver.
However, when printing with a
printer driver other than the RPC-
TM
S printer driver, you must make
the settings using the control pan-
el. For details about the printer
driver, see Help.
❒ The printer cannot print from ap-
plications that do not support cus-
tom size paper.