Removing Punch-Hole Chips; Sr770 (2 Tray Finisher) - Ricoh Aficio CL7000 Operating Instructions Manual

Troubleshooting

Removing Punch-hole Chips

When "Punch-hole Chips are Full"
appears on the display, the punch
waste box is full. Follow these steps to
remove paper chips.
Note
❒ The same message appears when
the punch waste box is not in-
stalled correctly.
Punch-hole Chips
4
are Full

SR770 (2 Tray Finisher)

A A A A
Open the front cover of the 2 tray
finisher.
The punch waste box is positioned
in the location shown in the illus-
tration.
B B B B
Pull out the punch waste box, and
then remove the paper chips.
108
C C C C
Re-install the punch waste box.
D D D D
Close the front cover of the 2 tray
finisher.
❖ ❖ ❖ ❖ If the message appears even after
removing the Punch-hole chips
If the "Punch-hole Chips are
Full" message appears on the
control panel even when the
punch waste box is not full,
chips might be stuck around the
p u n c h w a s t e b o x h o l e , a s
shown. Remove punch-hole
chips from around the hole.
ACE080S
ZDJP220J