Removing Misfed Paper; When "Remove Misfeed A:internal Path" Appears; When "Remove Misfeed B: Fusing Unit" Appears - Ricoh Aficio CL7000 Operating Instructions Manual

Removing Misfed Paper

If a paper misfeed occurs, an error
message appears indicating the loca-
tion of the misfed paper on the dis-
play.
❖ ❖ ❖ ❖ Misfeed Recovery
This printer has a misfeed recovery
function that sends misfed paper
to the standard tray or right cover.
Usually, you can remove the mis-
fed paper from one or other of
these trays.
When "Remove Misfeed
A:Internal Path" Appears
A A A A
Open the bottom-right cover by
pulling its lever.
B B B B
Move the blue lever up and down
to feed the misfed paper, and then
slowly pull out the paper.
C C C C
Close the right cover by pushing
the area labeled "PUSH".
When "Remove Misfeed B:
Fusing Unit" Appears
R CAUTION:
• The inside of the machine be-
comes very hot. Do not touch
parts labelled "hot surface".
Touching a "hot surface" could
result in a burn.
A A A A
If the 2 tray finisher or the book-
let finisher is installed, detach it
from the printer.
ZDJH206J
Reference
See p.2 "Detaching the SR770 (2
Tray Finisher)" or p.2 "Detach-
ing the SR910(Booklet Finish-
er)".
B B B B
If the duplex unit is installed,
open the duplex reversal unit.
Reference
p.3 "Opening and Closing the
Duplex Reversal Unit"
ZHXH205J
Removing Misfed Paper
ZDJP708J
4
91