Activating And Terminating The Scsiselect Utility - Fujitsu PG-126 User Manual

3.2 Activating and terminating the SCSISelect Utility

I
Activation of the SCSISelect utility
1) While the following prompt is displayed at the SERVER bootup, press the [Ctrl]
2) As shown below, two options, Configure/View Host Adapter Settings and SCSI
3) Every time the [F5] key is pressed, the screen can be switched between
4) To select the option, move the cursor to the desired option by pressing the [↑] or
5) Pressing the [Esc] key can restore to the previous screen at any time.
I
Termination of SCSISelect utility
1) Return the menu screen and press the [Esc] key. A message "Exit Utility?" is
8
+ [A] key to activate the SCSISelect utility.
Adaptec AHA-2940U2W BIOS v*.***
(c)1999 Adaptec, Inc.All Rights Reserved.
Press <Ctrl><A> for SCSISelect (TM) Utility!
Disk Utilities, are displayed on the first menu.
Adaptec AHA-2940U2W SCSISelect (TM) Utility v*.**
Configure / View Host Adapter Settings
monochrome and colored screens. However, according to the model of CRT
display, this function may not available.
[↓] key, then press the [Enter] key.
Note
When Configure/View Host Adapter Settings is selected, settings return to
the default value by pressing the [F6] key.
displayed. (See Step 2) of "Activating the SCSISelect utility" for the menu
screen.)
Options
SCSI Disk Utilities