Fujitsu PG-126 User Manual page 30

An outside view of this card is shown in Figure 1-1.
68-pin connector for
external SCSI device
(For ULTRA2)
2
68-pin connector for built-in
SCSI device (For ULTRA2)
Figure 1.1 Outside view
Notes
・ Since this card supports the 68-pin connectors for the ULTRA2 only,
don't connect any SCSI device to the other SCSI connectors.
68-pin connector for built-in
SCSI device (For ULTRA)
(Not supported)
AIC-7890 SCSI protocol chip
50-pin connector for built-in
SCSI device (For ULTRA)
(Not supported)