Install The Access Panel; Access The Product Rear Panel; Opening The Cable Management Arm - HP ProLiant DL380 Gen9 Server User Manual

Install the access panel

Place the access panel on top of the server with the hood latch open. Allow the panel to extend past the
1.
rear of the server approximately 1.25 cm (0.5 in).
Push down on the hood latch. The access panel slides to a closed position.
2.
Tighten the security screw on the hood latch.
3.

Access the product rear panel

Opening the cable management arm

To access the server rear panel:
Release the cable management arm.
1.
Operations 26