Table of Contents
Advertisement
2-5
Motherboard Installation
All motherboards have standard mounting holes to fi t different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.
Tools Needed
•
Phillips Screwdriver
•
Pan head screws (10 pieces)
•
Standoffs (10 pieces, if needed)
Location of Mounting Holes
There are ten (10) mounting holes on this motherboard indicated by the arrows.
JI2C1
1
JI2C2
1
1
1
2
3
4
I-SATA5
I-SATA4
I-SATA3
I-SATA2
I-SATA1
I-SATA0
JL1
SAS4~7
Warning: 1) To avoid damaging the motherboard and its components, please do
not use a force greater than 8 lb/inch on each mounting screw during motherboard
installation. 2) Some components are very close to the mounting holes. Please take
precautionary measures to avoid damaging
motherboard to the chassis.
LED3
JPL1
LAN
CTRL
82580
LED1
BMC
CTRL
XDP_CPU
1
JPG1
Battery
XDP_PCH
Intel IOH
BIOS
JBT1
BUZZER
SAS0~3
JF1
JD1
2-13
Chapter 2: Installation
USB0/1
VGA
COM1
LAN2
LAN1
JPW4
IPMI_LAN
X9DBU
Rev. 1.02
FAN3
FAN2
these components when installing the
KB/MOUSE
PHY
JPW3
JPW2
JPW1
FAN1
Advertisement
Table of Contents
