Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supero C7B250-CB-ML User Manual

Supermicro C7B250-CB-ML Motherboard User's Manual

2-5 Motherboard Installation

All motherboards have standard mounting holes to fit different types of
chassis. Make sure that the locations of all the mounting holes for both
motherboard and chassis match. Although a chassis may have both plas-
tic and metal mounting fasteners, metal ones are highly recommended
because they ground the motherboard to the chassis. Make sure that the
metal standoffs click in or are screwed in tightly. Then use a screwdriver
to secure the motherboard onto the motherboard tray.
Philips Screwdriver (1)

Tools Needed

JPME2:
1-2:NORMAL
2-3:ME MANUFACTURING MODE
JL1:
CHASSIS
INTRUSION
JBT1
I-SATA4 I-SATA2
I-SATA5 I-SATA3

Location of Mounting Holes

Attention! 1) To avoid damaging the motherboard and its compo-
nents, please do not use a force greater than 8 lb/inch on each mount-
ing screw during motherboard installation. 2) Some components are
very close to the mounting holes. Please take precautionary measures
to avoid damaging these components when installing the motherboard
to the chassis.
Philips Screws (8)
HD AUDIO
BIOS LICENSE
B1 PCIE M.2
CONNECTOR 1
JCMOS
LED1 JSTBY1
JSTBY1:
5V STBY POWER
I-SATA0
I-SATA1
USB 4/5
(3.0)
LAN
USB 6/7(3.0)
JI2C1/JI2C2
ON :ENABLE
OFF:DISABLE
MH12
2280
MH11
2260
MH10
2242
DIMMA1
DIMMA2
DIMMB1
DIMMB2
SYS_FAN1
2-12
Standoffs (8)
Only if Needed
DVI
HDMI/DP
KB/MOUSE
USB 0/1
JVR1
JPUSB1:USB0/1 WAKE UP
1-2 ENABLE
2-3 DISABLE
JPW1