Port (Group 1–5)
Description
Value Range
Default Value
Configuration File Reference
Priority (Group 1–3)
Description
Value Range
Default Value
Configuration File Reference
Label (Group 1–5)
Description
Value Range
Default Value
Configuration File Reference
Enable Transmission (Group 1–5)
Description
Value Range
Default Value
Configuration File Reference
4.3.6 LDAP Settings
This screen allows you to change the LDAP Settings.
Document Version 2016-05
Specifies the port number for multi-cast paging for each channel
group.
0–65535
0: Disable
0
MPAGE_PORTm
Selects the priority of the low priority channel group.
The priority of multi-cast paging group1-3 is lower than the talking.
Priority 4 is higher than Priority 5.
4, 5
5
MPAGE_PRIORITYm
Specifies a label for each channel group.
Max. 24 characters
Not stored.
MPAGE_LABELm
Selects the sending multi-cast paging.
•
Yes
•
No
No
MPAGE_SEND_ENABLEm
4.3.6 LDAP Settings
Administrator Guide
75