Panasonic KX-HDV430 Administrator's Manual page 17

Configuring Settings from the Web User Interface
To close the unit's Web port
1.
In the Web user interface, click [Web Port Close].
2.
Click OK.
Note
•
The Web port of the unit will be closed automatically in the following conditions:
–
3 consecutive unsuccessful login attempts occur.
•
The Web port can be set to stay open continuously, through Configuration file programming (→ see
"HTTPD_PORTOPEN_AUTO" in 5.3.8 HTTPD/WEB Settings). However, please recognize the
possibility of unauthorized access to the unit by doing so.
Access Levels (IDs and Passwords)
2 accounts with different access privileges are provided for accessing the Web user interface: User and
Administrator. Each account has its own ID and password, which are required to log in to the Web user
interface.
Account
User End users
Administrator Network
administrators,
etc.
Notice
•
Only one account can be logged in to the Web user interface at a time. If you try to access the Web
user interface while someone is logged in, you will be denied access.
•
You cannot log in to the Web user interface even under the same account as someone who is already
logged in.
•
The user password is required to change the settings.
•
The IDs can be changed through configuration file programming (→ see "ADMIN_ID" and "USER_ID"
in 5.3.8 HTTPD/WEB Settings).
•
If you forget your account IDs or passwords, consult your phone system dealer/service provider.
Document Version 2016-05
Target User
(default)
user
admin
ID Password
(default)
-blank-
(NULL)
adminpass
1.1.6 Web User Interface Programming
Password Restrictions
•
When logged in as User, you can
change the password for the
User account (→ see 4.4.2 User
Password Settings).
•
The password can consist of 6 to
64 ASCII characters (case-
sensitive) (→ see Entering
Characters in 1.1.6.4 Accessing
the Web User Interface).
•
When logged in as Administrator,
you can change the password for
both the User and Administrator
accounts (→ see 4.4.3 Admin
Password Settings).
•
The password can consist of 6 to
64 ASCII characters (case-
sensitive) (→ see Entering
Characters in 1.1.6.4 Accessing
the Web User Interface).
Administrator Guide 17