Panasonic KX-HDV430 Administrator's Manual page 290

5.3.34 Call Control Settings
Description
Value Range
Default Value
Web User Interface Reference
SHARED_STOP_LINE_SEIZE
Value Format
Description
Value Range
Default Value
FWD_DND_SYNCHRO_ENABLE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
290 Administrator Guide
Specifies whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
•
Availability depends on your phone system.
•
Y (Enable shared call)
•
N (Disable shared call)
Note
•
If set to "Y", the SIP server will control the line by using a
shared-call signaling method.
•
If set to "N", the SIP server will control the line by using a
standard signaling method.
N
Enable Shared Call
BOOLEAN
Specifies whether to stop seizing the Shared Call line at the unit side.
•
Y: Stop seizing the line
•
N: Seize the line
N
FWD_DND_SYNCHRO_ENABLE_1, FWD_DND_SYNCHRO_ENABLE_2,
..., FWD_DND_SYNCHRO_ENABLE_16
BOOLEAN
Specifies whether to synchronize the Do Not Disturb and Call
Forward settings, configured via the Web user interface or phone
user interface, between the unit and the portal server that is provided
by your phone system dealer/service provider.
Note
•
Even if you specify "Y", this feature may not function properly if
your phone system does not support it. Before you configure
this setting, consult your phone system dealer/service provider.
•
Y (Enable Do Not Disturb/Call Forward synchronization)
•
N (Disable Do Not Disturb/Call Forward synchronization)
N
Enable Key Synchronization (Enable Key Synchronisation)
Document Version 2016-05