Panasonic KX-HDV430 Administrator's Manual page 241

Default Value
SIP_DETECT_SSAF_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
SIP_RCV_DET_HEADER_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
SIP_RCV_DET_REQURI_n
Parameter Name Example
Value Format
Document Version 2016-05
N
SIP_DETECT_SSAF_1, SIP_DETECT_SSAF_2, ...,
SIP_DETECT_SSAF_16
BOOLEAN
Specifies whether to enable SSAF for the SIP servers (registrar
server, proxy server, and presence server).
•
Y (Enable SSAF)
•
N (Disable SSAF)
Note
•
If set to "Y", the unit receives SIP messages only from the
source addresses stored in the SIP servers (registrar server,
proxy server, and presence server), and not from other
addresses. However, if "SIP_OUTPROXY_ADDR_n" in
5.3.22 SIP Settings is specified, the unit also receives SIP
messages from the source address stored in the SIP outbound
proxy server.
N
Enable SSAF (SIP Source Address Filter)
SIP_RCV_DET_HEADER_1, SIP_RCV_DET_HEADER_2, ...,
SIP_RCV_DET_HEADER_16
BOOLEAN
Specifies whether to check the user name part of the SIP URI in the
"To" header when receiving the INVITE message with an incorrect
target SIP URI.
•
Y (Enable username check)
•
N (Disable username check)
Note
•
If set to "Y", the unit will return an error reply when it receives
the INVITE message with an incorrect target SIP URI.
•
If set to "N", the unit will not check the user name part of the
SIP URI in the "To" header.
N
SIP_RCV_DET_REQURI_1, SIP_RCV_DET_REQURI_2, ...,
SIP_RCV_DET_REQURI_16
BOOLEAN
5.3.22 SIP Settings
Administrator Guide 241