Reorder Tone - Panasonic KX-HDV430 Administrator's Manual

4.6.5 Tone Settings
Tone Timings
Description
Value Range
Default Value
Configuration File Reference

4.6.5.5 Reorder Tone

Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
Tone Timings
Description
Value Range
Default Value
Configuration File Reference
134 Administrator Guide
Specifies the pattern, in milliseconds, of stutter dial tones to notify
that a voice mail is waiting, using up to 22 whole numbers (off 1, on 1,
off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
DIAL_TONE4_TIMING
Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "480,620", the unit will use a
mixed signal of a 480 Hz tone and a 620 Hz tone.
480,620
REORDER_TONE_FRQ
Specifies the pattern, in milliseconds, of reorder tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
60,250,190
Note
•
Avoid setting 1–50 for any of the values.
REORDER_TONE_TIMING
Document Version 2016-05