Introduction; Technical Specifications - Danfoss ECtemp Next Plus Installation Manual

Danfoss ECtemp Next Plus
1

Introduction

The Danfoss ECtemp Next Plus is an electronic program-
mable timer thermostat used for controlling electrical floor
heating elements. The thermostat is designed for fixed
installation only and can be used for both direct heating of
the entire room and for comfort heating of the floor.
More information on this product can also be found at:
electricheating�danfoss�com
1�1

Technical Specifications

Operation voltage
Standby power consumption
Relay:
Resistive load
Inductive load
Floor sensor
Sensing values:
(Default NTC 15 K)
0°C
20°C
50°C
Control
Installation Guide
85-250V~, 50/60 Hz
0,4 W
Max. 16 A / 3680 W @ 230 V
cos φ= 0.3 Max. 1 A
Floor Sensor NTC 10 kΩ
at 25°C
Room Sensor NTC 10 kΩ
at 25°C
42 kΩ
18 kΩ
6 kΩ
Hysteresis ± 1.0° C
3