Danfoss ECtemp Next Plus Installation Manual page 4

Ambient temperature
Frost protection temperature
Temperature range
Sensor failure monitoring
Cable specification max.
Ball pressure test temperature
Pollution degree
Controller type
Software class
Storage temperature
IP class
Protection class
Dimensions
Weight
Electrical safety and Electro-Magnetic Compatibility for
this product is covered by the compliance with the EN/IEC
4
Danfoss ECtemp Next Plus
-10°C to +60°C
5°C to +9°C (default 5°C)
Room temperature: 5-35°C.
Floor temperature: Max. 35°C
is default.
The thermostat has a built-in
monitoring circuit, which will
switch off the heating if the
sensor is disconnected or short-
circuited
1x4 mm or 2x2,5 mm
2
75°C
2 (domestic use)
1C
A
-20°C to +65°C
30
Class II -
86 x 86 x 16/40.5 mm
(in-wall depth: 24.5 mm)
103 g
2
Installation Guide