Table Of Contents; Introduction - Danfoss DEVIreg 530 Installation Manual

DEVIreg™ 530

Table of Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . .
1.1
1.2
2 Mounting Instructions . . . . . . . . . . . . . . . .
3 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . 12
5 Disposal Instruction . . . . . . . . . . . . . . . . . . 14
1

Introduction

DEVIreg™ 530 is an electronic thermostat provided with a
2-pole switch and a wire sensor to measure and control the
desired floor temperature. It can be either flush-mounted
(standard) or surface-mounted (using special box).
The thermostat has a button for adjusting the temperature
setting with a scale from (
to approximately 8°C). Furthermore, it has a LED indicator
showing standby periods (green light) and heating periods
(red light).
More information on this product can also be found at:
devireg.devi.com
Installation Guide
Technical Specifications . . . . . . . . . . . .
Safety Instructions . . . . . . . . . . . . . . . .
) 1 to 6 (each step corresponds
3
4
5
6
3