ECtemp 330 (+5 to +45°C)
Table of Contents
1
1.1
1.2
2
3
Settings . . . . . . . . . . . . . . . . . . . . . . . . 7
4
Warranty. . . . . . . . . . . . . . . . . . . . . . . 10
5
1
Introduction
ECtemp 330 is an electronic thermostat to be installed in
electric cabinets with DIN rail attachment. The thermostat
must be installed via an all-pole disconnection switch. Ei-
ther a floor sensor or an external room sensor must be used
to measure and control the desired temperature.
The thermostat has a button to adjust the temperature
setting with a scale from +5 to +45°C. An LED indicator
shows standby periods (green light) and heating periods
(red light).
More information on this product can also be found at:
ectemp.danfoss.com
Installation Guide
3