Art.uim-138 Display Module (For Use With The Art.138N Amplifier Module) - Videx 25H/SP/DDA/2W Technical Manual

1 way “2 wire” dda audio intercom kit
Table of Contents

Advertisement

25H/SP/DDA/2W
ART.UIM-138 DISPLAY MODULE
The UIM-138 display module is designed to interface with the 138N amplifier module for the VX2200 system
bringing features normally only found on digital door panels to the traditional call button panels. Additional
features are included to aid users with disabilities and make the process of calling an apartment more user
friendly helping comply with the Equality Act 2010.
The 2 line 16 character blue back lit LCD display is protected behind a 6mm Lexan window and shows call
progress information while also producing spoken call progress messages through the speaker of the 138N
amplifier.
The UIM-138 can be programmed using the current VX2X00 programming software (version 7.0.0.7 or later)
allowing user names, apartment numbers and additional displayed messages to be programmed. The
module connects to the 138N amplifier module via a 'plug-in' wire harness and connects to a PC or laptop
via a standard USB connection.
Key Features Include:
Display Contrast and Voice Annunciation Volume Controls
There are two control POTs available on the UIM-138 module for adjusting the display contrast and the voice
annunciation volume.
CON
Up
Down
Auxiliary Input Modes
The UIM-138 module has 5 programmable auxiliary inputs. The table below shows the operating modes
available for each input and is set using the PC software.
Mode
1
Auxiliary 1
2
3
Scroll < (back)
4
5 - 10
currently unavailable, left for future expansion
25H/SP/DDA/2W - TECHNICAL MANUAL
(1 way "2 wire" DDA audio intercom kit)
(FOR USE WITH THE ART.138N AMPLIFIER MODULE)
• 2 line 16 character blue back lit display.
• Voice annunciation output.
• 5 programmable auxiliary inputs.
• A switched 0V auxiliary output..
• USB port.
• Display contrast and voice annunciation volume adjustments.
CON
VOL
Up
High
Down
display contrast
adjustment
I1 (Aux 1)
I2 (Aux 2)
Auxiliary 2
message
message
Call ID.1
Activate AO
Call
Call ID.25
Call ID.26
VOL
Low
High
Low
I3 (Aux 3)
Auxiliary 3
message
currently unavailable
Scroll > (forward)
Call ID.27
11
voice annunciation
volume adjustment
I4 (Aux 4)
Auxiliary 4
message
End call
currently unavailable
Call ID.28
EN-UK - V.1.2 - 04/01/16
VIDEX
I5 (Aux 5)
Auxiliary 5
message
Activate relay
End call
Call ID.29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

11j/sp/dda/2

Table of Contents