Update The Controller - AB Quality 1756-ENBT ControlLogix Installation Instructions Manual

Update the Controller

TIP
1. Connect the controller or chassis to the same network as your
workstation.
2. Start ControlFLASH software.
3. Choose Next >.
4. Select the catalog number of the controller and choose Next >.
5. Expand the network until you see the controller.
IMPORTANT
To expand a network one level, do
one of the following:
• Double-click the network.
• Select the network and
press the
• Click the + sign.
ControlLogix® Controller and Memory Board 29
RSLogix 5000 software, revision 10.0 or later, lets
you update the firmware of a controller as part of
the download sequence. To update the controller,
download your project and follow the prompts of
the software.
If the required network is not shown, first
configure a driver for the network in RSLinx
software.
→
key.
−
Workstation
+
Linx Gateways, Ethernet
−
driver
−
communication module
−
Publication
1756-IN101J-EN-P - November 2004
backplane
+
controller