Apply Chassis Power - AB Quality 1756-ENBT ControlLogix Installation Instructions Manual

Apply Chassis Power

Check Power Supply and Module Status
Check the LED indicators and alphanumeric display to determine if the
power supply and module are operating properly.
Power Supply
indicator is GREEN.
The alphanumeric display should cycle through the following states: "TEST -
PASS - OK - REV x.x," where "x.x" is the module's firmware revision. The
display then alternates between "OK" and the module's EtherNet/IP address.
ControlLogix EtherNet/IP Bridge Module 15
LINK NET OK
LINK
NET
31281-M
Publication
31280-M
Alphanumeric
Display
OK indicator is
red during self-test,
then green.
1756-IN019C-EN-P - November 2004