Vehicle Detection - HIKVISION DS-96128NI-I16 User Manual

detection sensitivity.
Sensitivity: Range [1-5]. The higher the value is, the more easily the face can be detected.
7. Click Apply to activate the settings.

9.2 Vehicle Detection

Purpose:
Vehicle Detection is available for the road traffic monitoring. In Vehicle Detection, the passed vehicle can be
detected and the picture of its license plate can be captured. You can send alarm signal to notify the surveillance
center and upload the captured picture to FTP server.
Steps:
1. Enter the VCA settings interface.
Menu> Camera> VCA
2. Select the camera to configure the VCA.
You can click the checkbox of Save VCA Picture to save the captured pictures of VCA detection.
3. Select the VCA detection type to Vehicle Detection.
4. Check the Enable checkbox to enable this function.
5. Click to configure the trigger channel, arming schedule and linkage actions for the Blacklist, Whitelist
and Others.
6. Click the Rule Settings to enter the rule settings interface. Configure the lane, upload picture and overlay
Network Video Recorder User Manual
Figure 9. 2 Set Face Detection Sensitivity
Figure 9. 3 Set Vehicle Detection
129