HIKVISION DS-96128NI-I16 User Manual page 28

3. After the time settings, click Next button which takes you back to the Network Setup Wizard window, as
shown in the following figure.
4. Click Next button after you configured the basic network parameters. Then you will enter the Advanced
Network Parameter interface. You can enable UPnP, DDNS and set other ports according to your need.
5. Click Next button after you configured the network parameters, which takes you to the RAID configuration
window.
Network Video Recorder User Manual
Figure 2. 13 Network Setting
Figure 2. 14 Advanced Network Parameters
27